We operate a UKAS-accredited sound insulation testing service throughout London and Greater London providing you with reports to achieve building control sign off with a quick and reliable turnaround.

We provide precompletion sound testing across London and the surrounding towns of Croydon, Chelmsford and Southend-on-Sea. APT Sound Testing Ltd offers a ‘one stop solution’ for all your precompletion testing services for Part E, Part G and Part L of the Building Regulations – if you need a ‘one stop’ solution we are can help.

If you have a single dwelling or a site containing hundreds of units we can help you to achieve compliance and building control sign off. Offering our one stop solution we can minimise your workload by offering a single point of contact throughout the design and construction phase of your development. We also offer large cost savings for developers requiring multiple services such as Air Tightness, Sound Insulation and Ventilation Testing throughout London and the South East.

As we are a UKAS accredited Laboratory for Sound Testing, you can be sure our sound test reportage and acoustic design reports are of the highest standard, and will be accepted by your local London Building Control body. Using our experienced acoustic engineers, we can provide highly competitive pricing and a friendly proactive service from the design stage of projects through to building completion and handover.

We know the challenges involved with gaining planning permission, which is why we also offer our noise survey and SAP assessment solution. Our technical team are eager to help you through every step of your project providing a seamless cost effective solution that guarantees a great result every time.

We undertake our sound testing services throughout London and the City of London, Barking and Dagenham, Barnet, Bexley, Brent, Bromley, Camden, Croydon, Ealing, Enfield, Greenwich, Hackney, Hammersmith and Fulham, Haringey, Harrow, Havering, Hillingdon, Hounslow, Islington, Kensington and Chelsea, Kingston upon Thames, Lambeth, Lewisham, Merton, Newham, Redbridge, Richmond upon Thames, Southwark, Sutton, Tower Hamlets, Waltham Forest, Wandsworth and Westminster to help you achieve Building Control sign off.

Sound insulation testing is measuring the airborne or impact noise coming through a partition. The partition is the floor, wall or ceiling and there will be different requirements for each. Part E Building Regulations, England, Wales and Northern Ireland, is a set of regulations for both new build and conversion residential builds. Approved Document E was introduced in 2003, as a way of protecting residents from noise between dwellings. The regulations apply to all new-build and conversion constructions with residences next to one another.
A pair of airborne wall sound insulation tests can be completed in 1-2 hours. A 6 pack containing 2 airborne wall, 2 airborne floor and 2 impact floor tests will usually take 2-3 hours. For larger developments, such as apartment blocks, it would be worth allowing up to 2-3 hours for each 6 pack of sound tests; e.g. 12 tests would take 4-6 hours. We usually supply a full testing schedule with each quote, to ensure you comply with Building Regulations and to help you prepare correct plots for testing.
Approved Document E, requires that various walls and floors are tested between adjoining dwellings. The exact number of walls requiring testing will vary depending on the overall size of the development and the amount of different types of wall or floor constructions. On a typical small to medium development consisting of up to 10 dwellings with the same partition construction the project will usually require one single 6 pack. This consists of 2 airborne wall tests, 2 airborne floor tests and 2 impact floor tests. On a pair of semi-detached houses you may only require 2 airborne sound tests through the walls.
It depends on the location and the number of sound tests that are required on each site; it can be as low as £75 plus VAT per test if we are undertaking multiple tests. Please contact us at info@aptsoundtesting.co.uk to obtain a no obligation quote along with some friendly advice for you project.

UKAS accredited sound testing strictly follows ISO 16283 and the standards surrounding ‘calibration’, the process that makes sure all recording devices are operating without the fluctuation that gives a bias to specific frequencies. All testing equipment needs to be set at the correct amount and across these standards so that testing can be undertaken consistently at all times.Airborne sound testing is carried out using the following test methodology:

  1. A sound Level Meter gathers the ‘background noise level’ of the room, taking external noises into account, those such as road traffic can have a significant impact.
  2. A large dodecahedron speaker is placed in the transmitting room (on the other side of the partition, usually next door) and is measured in the receiving room, on the other side.
  3. The rooms ‘reverberation level’ is gathered first in the receiving room and source room to measure its ‘reflectiveness’ and its ‘decay time’, the amount of time it takes for a sound to dissipate.
  4. You then measure in the receiving room with a Sound Level Meter to assess the levels of sound transmission.
  5. The process above is repeated by moving both the speaker and measuring location to numerous locations in the rooms so that any resonances and anomalies are gathered.

In all cases the more complete a development, the more likely it is to meet air testing requirements. When we send out our quotation we also forward a specific air leakage checklist to help our client prepare for the testing.

Basically if you meet the following criteria will generally have a much better chance of passing the testing at the first attempt.

a. The building envelope should be fully complete; this includes walls, floors and ceilings.
b. All doors and windows must be fully fitted and able to shut tightly against their seals.
c. All electric fittings must be installed and functional.
d. All mechanical fittings must be installed and functional.
e. Gaps within walls and floors must be sealed.
f. All service penetrations must be fully sealed through the building envelope.
g. Bathrooms and kitchens must be fully fitted and all service penetrations sealed.
h. All mechanical ventilation turned off with grilles sealed.
i. All trickle vents to windows and doors must be sealed.
j. All fireplaces must be sealed.
k. Ensure water is present in soil pipes.
l. 240v power must be available on site.

To pass your sound insulation testing in compliance with Approved Document E, you will need to achieve the following sound insulation results:For separating floors & walls on new build projects

  • Separating Floor Between Flats Airborne Noise Reduction = 45dB Dn T,w + (Ctr) or greater
  • Separating Floor Between Flats Impact Noise Reduction = 62dB Ln T,w or less
  • Airborne Wall Tests to achieve 45dB Dn T,w + (Ctr) or more

For separating floors & walls on conversion projects

  • Separating Floor Between Flats Airborne Noise Reduction = 43dB Dn T,w + (Ctr) or greater
  • Separating Floor Between Flats Impact Noise Reduction = 64dB Ln T,w or less
  • Airborne Wall Tests to achieve 43dB Dn T,w + (Ctr) or more

In all cases the more complete a development, the more likely it is to pass the sound test and achieve the requirements of Approved Document E. When we send out our quotation we also forward a specific sound insulation checklist to help our client prepare for the testing.

Basically if you meet the following criteria will generally have a much better chance of passing the testing at the first attempt.

1.Site noise should be kept to a minimum with no power tools, generators, radios, fire alarms etc. operating
2.Walls, floors and ceilings must be completed
3.Windows & external doors must be fully fitted, glazed and closed
4.Any ventilation systems should be installed and closed
5.Internal doors should be hung and closed.
6.Skirting boards, electrical sockets and light switches should be fitted.
7.To test impact sound transmission, we can only test the fabric of the building, therefore there must be no additional final finish floorings fitted
8.Rooms in which testing is to be carried out should be empty and tidy with safe access.
9.No-one else should be working in the building during the test
10.Free access to the properties on both sides of the separating partition is required
11.240v (50Hz) mains power is required within the property to run our test equipment

Firstly don’t panic. If you’re sound test fails we can recommend an acoustic upgrade to help you pass the sound test in compliance with Approved Document E.