BS8233 Noise Surveys in London

BS8233 Noise Surveys in London

APT Sound Testing have undertaken undertake many BS8233 Noise Surveys in London to comply with local planning conditions.  We are a professional noise and acoustic consultancy firm operating throughout Greater London and the Home Counties.

Our fully qualified and highly experienced engineers provide expert advice and conduct survey analysis into all aspects of sound, such as complying with local planning conditions NEC’s and investigating complaints into excessive noise such as excess plant noise etc.

We have undertaken many BS8233 noise surveys in London  on numerous potential housing and other noise-sensitive sites throughout the Capital and the UK. Our acoustic surveys cater for sites that may be exposed to noise from road, rail or or from noisy industrial activities.

sound testing

We undertake wide range of services from planning noise assessments through to noise mitigation proposals. Where it is proposed to install new plant or equipment, we undertake noise surveys to determine noise emission limits, in line with Local Authority requirements, and provide advice on mitigation. As a London based company we have an in depth knowledge on complying with London planning permissions and local legislation. Our engineers are expertly suited to carry out noise assessments, with a wealth of experience in assessing the sound impact of residential, industrial and commercial businesses in the community.

Noise assessments and reports should be submitted during the pre-application process and discussions on planning applications. In many circumstances a planning condition will stipulate that a noise survey will need to be undertaken.

Planning noise surveys are normally carried out at the design stage of the project prior to the commencement of construction, this is to allow the acoustic design of the building to take into account the local noise levels. If the local noise levels are excessive then a more robust acoustic twill need to be adopted to mitigate any potential noise problems. Thereafter the local authority may also require post a BS 8182 London noise survey to prove that the noise standards have been achieved within the living rooms and bedrooms.

if you would like more information in regards to our BS8233 Planning Noise Surveys, please don’t hesitate to contact us now at: info@aptsoundtesting.co.uk, or call me direct on 07775623464.

The Correct Site Conditions for Sound Testing

 The Correct Site Conditions for Sound Testing 

To undertake accurate sound testing, we require the site noise levels to be kept to a minimum. During the sound insulation testing, our equipment produces high levels of noise – between 100-110dB! However, to record accurate test measurements, relatively quiet conditions are required on site throughout the testing. Any site operatives working in the testing area will have to leave temporarily and any noisy works in the vicinity of the test areas including external site activity such as groundworks, drilling and banging will need to be halted. 

We also require full access to all the rooms being tested. We provide a full testing schedule within our quotation which will clearly identify suitable couplings of test rooms which may require access to adjoining neighbours dwellings to enable us to complete the sound testing

APT Sound Testing will try to schedule the sound testing with you at a time when noise can be controlled to achieve the best possible testing results. 

sound testing

What’s the Duration of the Sound Testing? 

The time taken to undertake sound testing varies from project to project as no site is exactly the same. Taking into account standard site conditions a set of tests on houses -two airborne walls will take one to two hours. A six pack of tests on flats – 2 airborne walls, two airborne floors and two impact tests will take between two to three hours. Throughout the sound testing, we will require full free uninterrupted access to the units/rooms in all test areas. 

If you require more information on sound testing, please contact us now at info@aptsoundtesting.co.uk or phone me direct on 07775623464.

SOUND TESTING ON LONDON DEVELOPMENTS

 SOUND TESTING ON LONDON DEVELOPMENTS

London is a massive city containing over 8 million people. In this overcrowded environment it is essential that noise transference between adjoining properties in kept to a minimum for the occupant’s well being.

When there are problems with noise transference between dwellings, and the building’s design is called into question, we can offer advice on how to upgrade the wall and/or wall partition to improve the sound insulation values.

We have extensive knowledge regarding the way different materials and construction methods can influence the results of a sound test and subsequent noise transference, this helps to ensure your company achieves compliance with the Sound Testing for Part E of Building Regulations at pre completion stage.

Pre completion sound testing in London has been a mandatory requirement since July 2003. All new build properties and conversions which were built after this date require 10% of each party wall/floor construction type to be tested. Sound insulation testing is to be carried out between pairs of rooms separated by party walls and/or floors. In is usual to test between living rooms and bedrooms as these are classed as the two main habitable rooms; however, other rooms can be used if this is not possible such as study’s, kitchens and dining rooms.

Also, we are also experiencing a rise in the amount of sound testing that’s required to existing London buildings which isn’t surprising as the amounts of noise complaints to councils has doubled in the last 10 years, as a result we have carried out a large amount of sound tests in council/housing association blocks, where the residents are experiencing excess noise between the dividing wall and floor partitions.

We also undertake sound testing to existing flats where the lease stipulates that wooden floors should not be used instead of carpets and as a result of the change of floor finishes the noise levels have increased through the floors – especially the impact noise.  In all these instances we can undertake sound testing to highlight the existing noise levels so acoustic upgrades – if required) can be targeted and implemented, i.e. it may be as simple as installing an acoustic membrane on the floors below the timber floor.

sound testing equipment

The airborne sound testing is undertaken by using a sound source, amplifier and loudspeaker to generate a high noise level in one room (the source room). Noise measurements are then taken in both the source and receiver rooms using a prescribed number of source and microphone positions. The background levels in the receiver room are measured and the reverberation time in the receiver room is also measured. From the results the airborne sound insulation (DnT,w + Ctr) is calculated and compared to the requirements of Approved Document E.

For vertically separated rooms, another type of sound test called Impact sound testing may also be required. This sound test is undertaken using a tapping machine which drops a series of weights onto the floor of the upper room. The noise level in the lower (receiver) room is measured for a prescribed number of source and microphone locations. The background levels in the receiver room are measured and the reverberation time in the receiver room is also measured. From the results, the impact sound insulation results (LnT,w) is calculated and compared to the requirements of Approved Document E of Building Regulations.

To help control noise issues APT Sound Testing can undertake UKAS accredited Part E sound testing in London and the South East. Our sound test engineers carry all the latest acoustic equipment. We provide full UKAS accredited sound insulation testing and air testing, so all or testing is completed to a strict quality controlled standard

If you would like advice on your acoustic design or sound testing in London, please contact us now at info@aptsoundtesting.co.uk or call us on 07775623464.

PLANNING NOISE SURVEY GUIDANCE

Planning Noise Survey Guidance

This guidance is to assist developers and consultants who are involved in  developments where planning permission is required and noise is a consideration and a noise survey for planning is a planning condition requirement .

At what stage will a noise survey and PPG24 report required?

A noise survey and PPG24 report may be required at the application stage or once planning.

permission has been granted. A noise survey and report are required if:

  • the proposed development with commercial areas that may create noise which may affect nearby noise sensitive properties. For example, a new commercial activity near existing residential properties.
  • the proposed development positioning will be sensitive to noise and is likely to be affected by existing noise sources i.e. busy roads, railway, airports or commercial activity.

What is the PPG24 noise report for?

The PPG24 noise report is to demonstrate that:

  • the source of noise is evaluated and quantified
  • nearby noise sensitive receptors identified
  • noise receptors have been determined with reference to noise standards

The PPG24 noise report (where required) will also set out control measures where it is necessary to reduce noise to acceptable levels. For example, the installation of different glazing e.g. from double to triple glazed panels or acoustic trickle vents are installed so that internal noise standards are met.

sound testing equipment

When should a PPG24 noise report be submitted?

A PPG24 noise survey and report should be submitted during pre-application discussions or

more commonly during a planning application. In some circumstances, a planning condition will be included on the planning permission requiring the submission of a noise report.

As noise surveys are usually carried out prior to completion of a development, compliance with any noise standards are demonstrated by calculation. However, the local authority may also request a post-completion noise survey to prove that noise standards have been achieved.

Who is suitably qualified to carry out noise assessments and provide a noise report?

A noise survey must be carried out by a suitably qualified acoustic consultant. APT Sound Testing is a UKAS accredited company and as such is deemed suitably qualified to undertake noise surveys for planning, we also have vast amount of experience and skill in dealing with PPG24 Noise Surveys for the planning applications for all types of developments throughout the United Kingdom.

If you would like more information on our PPG24 noise assessments or PPG24 Noise Surveys then please contact us at:  info@aptsoundtesting.co.uk or visit our website at: www.aptsoundtesting.co.uk

What is a Planning Noise Survey

What is a Planning Noise Survey

A planning noise survey needs to be carried out by a suitably qualified acoustic consultant, preferably UKAS accredited in acoustics. APT is UKAS accredited for acoustic surveys and we have vast amount of experience and skill in dealing with BS4142 noise assessments and PPG24 Noise Surveys for the planning applications for both small and large businesses and developments throughout London and the United Kingdom. All you need to do is send us a site plan layout showing the site along with the nearest noise sources such as a main road or railway line. Once received we will send you a quotation for a noise survey – it’s as simple as that!

sound testing

Noise Surveys for New Developments

A noise survey and report should be submitted during the pre-application process and discussions on planning applications. In many circumstances a planning condition will stipulate that a noise survey will need to be undertaken.

Noise surveys are normally carried out prior to completion, however the local authority may also require post a BS 8182 noise level survey to prove that the noise standards have been achieved within the living rooms and bedrooms.

The following information will usually need to be included within the noise survey report.

  1. The reason and scope of the report.
  2. Location plan of the proposed development and likely receptor points such as the nearest residential window/s.
  3. The noise survey Methodology including the noise monitoring location, the equipment used and the weather conditions during the noise survey.
  4. Reasons for deviations from standard methods.
  5. Full table of results.
  6. A comparison of survey results against the noise standards.
  7. Recommendations for noise control measures – acoustic barriers etc.
  8. Full calculations against noise reductions expected to support any suggested noise control measures.

When is a noise survey and PPG24 report required?

A noise survey and PPG24 report may be required at the application stage or once planning

permission has been granted. A noise survey and report are required if:

  • the proposed development with commercial areas that may create noise which may affect nearby noise sensitive properties. For example, a new commercial activity near existing residential properties.
  • the proposed development positioning will be sensitive to noise and is likely to be affected by existing noise sources i.e. busy roads, railway, airports or commercial activity.

What is the noise Survey report for?

The noise survey report is to demonstrate that:

  • the source of noise is evaluated and quantified
  • nearby noise sensitive receptors identified
  • noise receptors have been determined with reference to noise standards

 The noise survey report (where required) will also set out control measures where it is necessary to reduce noise to acceptable levels. For example, the installation of different glazing e.g. from double to triple glazed panels or acoustic trickle vents are installed so that internal noise standards are met.

If you would like more information on BS4142 noise survey or PPG24 noise surveys for your business or development, please contact us at: info@airpressuretesting.net or visit our website at: www.airpressuretesting.net  Bye for now APT