BS8233 Noise Surveys in London

BS8233 Noise Surveys in London

APT Sound Testing have undertaken undertake many BS8233 Noise Surveys in London to comply with local planning conditions.  We are a professional noise and acoustic consultancy firm operating throughout Greater London and the Home Counties.

Our fully qualified and highly experienced engineers provide expert advice and conduct survey analysis into all aspects of sound, such as complying with local planning conditions NEC’s and investigating complaints into excessive noise such as excess plant noise etc.

We have undertaken many BS8233 noise surveys in London  on numerous potential housing and other noise-sensitive sites throughout the Capital and the UK. Our acoustic surveys cater for sites that may be exposed to noise from road, rail or or from noisy industrial activities.

sound testing

We undertake wide range of services from planning noise assessments through to noise mitigation proposals. Where it is proposed to install new plant or equipment, we undertake noise surveys to determine noise emission limits, in line with Local Authority requirements, and provide advice on mitigation. As a London based company we have an in depth knowledge on complying with London planning permissions and local legislation. Our engineers are expertly suited to carry out noise assessments, with a wealth of experience in assessing the sound impact of residential, industrial and commercial businesses in the community.

Noise assessments and reports should be submitted during the pre-application process and discussions on planning applications. In many circumstances a planning condition will stipulate that a noise survey will need to be undertaken.

Planning noise surveys are normally carried out at the design stage of the project prior to the commencement of construction, this is to allow the acoustic design of the building to take into account the local noise levels. If the local noise levels are excessive then a more robust acoustic twill need to be adopted to mitigate any potential noise problems. Thereafter the local authority may also require post a BS 8182 London noise survey to prove that the noise standards have been achieved within the living rooms and bedrooms.

if you would like more information in regards to our BS8233 Planning Noise Surveys, please don’t hesitate to contact us now at: info@aptsoundtesting.co.uk, or call me direct on 07775623464.

What Types of Sound Testing Do I Need

 

What Types of Sound Testing Do I Need 

Sound Testing needs to be carried out between pairs of rooms separated by party walls or floors. In most cases, the rooms to be sound tested will be the two main habitable rooms – living rooms and bedrooms. All new build dwellings and conversions which were built after this 2004 are required to have 10% of each party wall/floor construction type to be tested.

 

The sound test procedure involves setting up a noise source in a room on one side of the party wall or floor and measuring the noise on both sides of the partition. The three types of Sound Tests usually required – depending on the project configuration) are:

sound testing equipment 

Airborne Wall Tests

Airborne wall sound tests may be required between separate dwellings where a lounge and/or bedroom are positioned against the dividing wall partition. The sound tests are undertaken by using a sound source, amplifier and loudspeaker to generate a high noise level in one room (the source room). Noise measurements are then taken in both the source and receiver rooms using a prescribed number of source and microphone positions.

The background levels in the receiver room are measured and the reverberation time in the receiver room is also measured. From the results, the airborne sound insulation (DnT,w + Ctr) is calculated and compared to the requirements of Approved Document E.

 

Airborne Floor Tests

For vertically separated dwellings, airborne floor sound testing may be required, where a lounge and/or bedroom sit’s against the dividing floor partition above and/or below a ‘habitable’ room. The sound tests are undertaken by using a sound source, amplifier and loudspeaker to generate a high noise level in one room (the source room). Noise measurements are then taken in both the source and receiver rooms using a prescribed number of source and microphone positions.

 

Impact Sound Tests

For vertically separated rooms, an Impact sound test may also be required. This sound test is undertaken using a “tapping machine”, (as above) which drops a series of weights onto the floor of the upper room. The noise level in the lower (receiver) room is measured for a prescribed number of source and microphone locations. The background levels in the receiver room are measured and the reverberation time in the receiver room is also measured. From the results, the impact sound insulation (L’nT,w) is calculated and compared to the requirements of Approved Document E.

 

Non-Residential Sound Testing

It is worth noting that sound insulation testing may also be required in non-residential buildings such as schools, hospitals, workplaces, whereas built performance needs to be demonstrated to ensure noise sensitive areas (e.g. classrooms, wards, meeting rooms) are suitably insulated from noisier areas or to comply with BB93 & BREEAM requirements.

 

Sample Sound Testing

If you have an existing building that you are about to convert info flats etc. and need to establish the acoustic performance of the existing partitions, we can undertake sample sound testing on walls and floors to check the sound insulation performance. Thereafter we can forward a targeted acoustic design to comply with Part E of Building Regulations, as well as undertaking the final pre-completion sound testing.

 

All APT’s test engineers carry the latest Norsonic equipment, which are class one rating all of our acoustic testing/sound testing is completed to a strict quality controlled standard. We provide full ISO & UKAS complaint sound testing.

If you would like more information in regards to your air and sound testing please contact us now at info@aptsoundtesting.co.uk or call us on 07775623464

 

controlled standard

Sound Insulation & Noise Flanking

Sound Insulation & Noise Flanking

Sound insulation & noise flanking describes the reduction of sound that passes between two spaces separated by a dividing element, such as a wall or floor partition. The sound energy passes through the dividing element (direct transmission) and through the surrounding structure (indirect or flanking transmission). The  noise reduction attributed to the sound insulation is realised via sound insulation testing.

 When the building’s acoustic design is taken into consideration, it is important to consider both methods of transmission. The dividing walls or floors, which flank/abut the dividing element/s, usually constitute the main paths for flanking transmission, but this can also occur at ventilation ducts, doorways, windows etc. If windows are positioned very close to the dividing partition then noise flanking will usually occur around the main building envelope, thus rendering your ‘high spec’ acoustic solution useless.

sound testing equipment

It is extremely unlikely that figures quoted from ‘laboratory sample’ sound test conditions will be achieved on site, as the laboratory installation is described in detail and followed to the letter. However, due to time constraints etc. it is not always possible to replicate the same conditions on a construction site, which is the reason why a 5dB point difference is allowed between the laboratory and construction site sound insulation performance.

Noise Flanking Paths

Flanking sound is defined as sound from a source room that is not transmitted via the separating building element e.g. the wall or floor partition. The sound is transmitted indirectly via paths such as external walls, windows, doors and internal corridors.

NoiseFlankingWall

If you would like more information on sound insulation testing and/or acoustic design service, please contact us at info@aptsoundtesting.co.uk or call us on 07775623464

SOUND TESTING ON LONDON DEVELOPMENTS

 SOUND TESTING ON LONDON DEVELOPMENTS

London is a massive city containing over 8 million people. In this overcrowded environment it is essential that noise transference between adjoining properties in kept to a minimum for the occupant’s well being.

When there are problems with noise transference between dwellings, and the building’s design is called into question, we can offer advice on how to upgrade the wall and/or wall partition to improve the sound insulation values.

We have extensive knowledge regarding the way different materials and construction methods can influence the results of a sound test and subsequent noise transference, this helps to ensure your company achieves compliance with the Sound Testing for Part E of Building Regulations at pre completion stage.

Pre completion sound testing in London has been a mandatory requirement since July 2003. All new build properties and conversions which were built after this date require 10% of each party wall/floor construction type to be tested. Sound insulation testing is to be carried out between pairs of rooms separated by party walls and/or floors. In is usual to test between living rooms and bedrooms as these are classed as the two main habitable rooms; however, other rooms can be used if this is not possible such as study’s, kitchens and dining rooms.

Also, we are also experiencing a rise in the amount of sound testing that’s required to existing London buildings which isn’t surprising as the amounts of noise complaints to councils has doubled in the last 10 years, as a result we have carried out a large amount of sound tests in council/housing association blocks, where the residents are experiencing excess noise between the dividing wall and floor partitions.

We also undertake sound testing to existing flats where the lease stipulates that wooden floors should not be used instead of carpets and as a result of the change of floor finishes the noise levels have increased through the floors – especially the impact noise.  In all these instances we can undertake sound testing to highlight the existing noise levels so acoustic upgrades – if required) can be targeted and implemented, i.e. it may be as simple as installing an acoustic membrane on the floors below the timber floor.

sound testing equipment

The airborne sound testing is undertaken by using a sound source, amplifier and loudspeaker to generate a high noise level in one room (the source room). Noise measurements are then taken in both the source and receiver rooms using a prescribed number of source and microphone positions. The background levels in the receiver room are measured and the reverberation time in the receiver room is also measured. From the results the airborne sound insulation (DnT,w + Ctr) is calculated and compared to the requirements of Approved Document E.

For vertically separated rooms, another type of sound test called Impact sound testing may also be required. This sound test is undertaken using a tapping machine which drops a series of weights onto the floor of the upper room. The noise level in the lower (receiver) room is measured for a prescribed number of source and microphone locations. The background levels in the receiver room are measured and the reverberation time in the receiver room is also measured. From the results, the impact sound insulation results (LnT,w) is calculated and compared to the requirements of Approved Document E of Building Regulations.

To help control noise issues APT Sound Testing can undertake UKAS accredited Part E sound testing in London and the South East. Our sound test engineers carry all the latest acoustic equipment. We provide full UKAS accredited sound insulation testing and air testing, so all or testing is completed to a strict quality controlled standard

If you would like advice on your acoustic design or sound testing in London, please contact us now at info@aptsoundtesting.co.uk or call us on 07775623464.

What is a Planning Noise Survey

What is a Planning Noise Survey

A planning noise survey needs to be carried out by a suitably qualified acoustic consultant, preferably UKAS accredited in acoustics. APT is UKAS accredited for acoustic surveys and we have vast amount of experience and skill in dealing with BS4142 noise assessments and PPG24 Noise Surveys for the planning applications for both small and large businesses and developments throughout London and the United Kingdom. All you need to do is send us a site plan layout showing the site along with the nearest noise sources such as a main road or railway line. Once received we will send you a quotation for a noise survey – it’s as simple as that!

sound testing

Noise Surveys for New Developments

A noise survey and report should be submitted during the pre-application process and discussions on planning applications. In many circumstances a planning condition will stipulate that a noise survey will need to be undertaken.

Noise surveys are normally carried out prior to completion, however the local authority may also require post a BS 8182 noise level survey to prove that the noise standards have been achieved within the living rooms and bedrooms.

The following information will usually need to be included within the noise survey report.

  1. The reason and scope of the report.
  2. Location plan of the proposed development and likely receptor points such as the nearest residential window/s.
  3. The noise survey Methodology including the noise monitoring location, the equipment used and the weather conditions during the noise survey.
  4. Reasons for deviations from standard methods.
  5. Full table of results.
  6. A comparison of survey results against the noise standards.
  7. Recommendations for noise control measures – acoustic barriers etc.
  8. Full calculations against noise reductions expected to support any suggested noise control measures.

When is a noise survey and PPG24 report required?

A noise survey and PPG24 report may be required at the application stage or once planning

permission has been granted. A noise survey and report are required if:

  • the proposed development with commercial areas that may create noise which may affect nearby noise sensitive properties. For example, a new commercial activity near existing residential properties.
  • the proposed development positioning will be sensitive to noise and is likely to be affected by existing noise sources i.e. busy roads, railway, airports or commercial activity.

What is the noise Survey report for?

The noise survey report is to demonstrate that:

  • the source of noise is evaluated and quantified
  • nearby noise sensitive receptors identified
  • noise receptors have been determined with reference to noise standards

 The noise survey report (where required) will also set out control measures where it is necessary to reduce noise to acceptable levels. For example, the installation of different glazing e.g. from double to triple glazed panels or acoustic trickle vents are installed so that internal noise standards are met.

If you would like more information on BS4142 noise survey or PPG24 noise surveys for your business or development, please contact us at: info@airpressuretesting.net or visit our website at: www.airpressuretesting.net  Bye for now APT