Sound Testing Definitions and Terms (1 of 2)

Sound Testing Definitions and Terms (1 of 2) 

Sound testing is usually undertaken near the end of a project to show that the party wall and floor partitions meet the standards shown in Building Regulations Approved Document E.  The method for testing for airborne and impact sound insulation is in full accordance with: the suggested methods presented in BS EN ISO 140-parts 4 & 7: 1998. Sound tests are broken down into various rating methods. The sound insulation definition and terms are as follows:

What is Sound Insulation?

Sound is transmitted through most walls and floors by setting the entire structure into vibration. The higher the transmission loss of a wall, the better it functions as a barrier to the passage of unwanted noise. There are two types of sound insulation testing in buildings: airborne and impact.

Airborne Sound

This is sound caused by vibrations which transmit through a medium and reach the ear or some other form of detecting device. Sound is measured in loudness (decibels (dB)) and frequency (Hertz (Hz)). Airborne sound (or airborne noise) is sound that is transmitted through the air.

Noise_Problems_Failed_Sound_Testing

Impact sound

This is sound arising from the impact of an object on a building element – wall, floor, or ceiling. Typical sources are footsteps, jumping, and dropped objects. Impact sound transmission occurs because the impact causes both sides of the building element to vibrate, which generates sound waves.

Flanking Noise Transmission

Flanking is the transmission of sound from a source room to a receiving room by paths other than straight through the separating wall and/or floor partition. For example, impact sound may be transmitted from one room to another through a common timber floor. Other common mechanisms for flanking transmission include suspended ceilings, pipework, ducting, etc. Flanking sound is always present, except in the ‘ideal’ acoustics laboratory. In practice the sound insulation is often limited by the flanking transmission.

If you have a project that’s needs acoustic design advice or sound insulation testing, then please contact us at: info@aptsoundtesting.co.uk or phone me (Darren) directly on 07775623464.

 

Sound Testing for Compliance with Lease Conditions

Sound Testing for Compliance with Lease Conditions

If you own or manage an apartment it has a lease agreement that has conditions relating to the changing of the floor construction, then you may require Sound Testing for Compliance with Lease Conditions. We undertake many leaseholder sound tests throughout London and the South East and offer a ‘4 step acoustic package’  to satisfy your lease conditions comprising of the following:

  1. Sample Sound Testing of the existing construction. This offers an accurate overview of the acoustic performance of the existing floor partition/s prior to the commencement of construction works. It also enables us to offer a targeted acoustic design using the sound insulation performance of the existing construction.
  1. Acoustic design review – once we have the performance figures from the sample sound testing have been established, we can forward a design that should improve the performance of the existing floor partition – even if you are changing the floor from a carpet to engineered timber floor finish!
  1. Site Visit – This allows us to check that the installation team is installing the acoustic materials as per manufacturer’s guidelines.
  1. Final Precompletion Sound Testing in-line with Approved Document E. This provides an accurate overview of the acoustic performance of the upgraded partition/s, the results of which can be handed over to the relevant person for sign off.

In most cases complaints are usually raised from impact noise such as foot fall from hard bottomed shoes etc. this is accentuated when the unit above has changed their floor finish from carpet to wood.

Sound_Insulation_Testing_Equipment

If you think you may have a problem with sound in your dwelling and or you have encountered complaints from a neighbour due to modifications you have made to the floor partition then please contact us now we can provide our ‘3 step plan’ to satisfy your units lease conditions, then please contact us now at: info@aptsoundtesting.co.uk  or phone Darren directly on 07775623464.

Sound Testing for Leasehold Compliance

Sound Testing for Leasehold Compliance

Clients often get in touch with us when they have run into trouble whilst undertaking refurbishments to their London apartments. In many cases they have a lease agreement that requires a sound insulation test be undertaken prior to the commencement of works and secondary sound testing upon completion of the works. Most people do not adhere to their lease agreements because they haven’t read the conditions which may result in very costly modifications to the finished floor finishes at the end of the project.

Noise_Problems_Failed_Sound_Testing

Many lease agreements contain something similar to the following conditions: ‘If the tenant wants to change the floor construction within his dwelling he shall’:

  • Commission an independent acoustic consultant to carry out a pre-installation test, design the new acoustic installation and carry out a post installation test and provide the results to the landlord’s surveyors for approval; and
  • Invite the Landlord’s surveyor to inspect the acoustic insulation before it is concealed; and
  • Accept that the Landlord, whilst granting this Licence, does not accept any responsibility for the design or performance of the insulation provided and that if any issues arise, the Tenant will address these immediately. In the event of reasonable complaint being upheld by the Landlord or his agent concerning noise affecting other Tenants within The Building, the Tenant will arrange for carpeting (the provision of which shall be determined by the Landlord) to be positioned and maintained at the Tenant’s sole cost.

To overcome potential problems and neighbour disputes we can undertake Sample Sound Testing of the existing construction. This offers an accurate overview of the acoustic performance of the existing floor partition/s prior to the commencement of construction works. we can then undertake an acoustic design review  to improve the performance of the existing floor partition – even if you are changing the floor finish from carpet (soft finish) to engineered timber floor (Hard finish) We can also undertake a site visit – This allows us to check that the installation team is installing the acoustic materials as per manufacturer’s guidelines. We can then undertake Precompletion Sound Testing in-line with Approved Document E. This provides an accurate overview of the acoustic performance of the upgraded partition/s, the results of which can be handed over to the relevant person for sign off.

If you are about to make changes to your apartment, and you think you may require Sound Testing for Leasehold Compliance and/or our acoustic test and design service, then please contact us now at: info@aptsoundtesting.co.uk  or phone Darren directly on 07775623464.