Acoustic Design Advice for my Sound Insulation Test
We at APT Sound Testing pride ourselves on offering a comprehensive acoustic design service to help you development attain compliance with Building Regulations Part E at the first attempt. If you send through the relevant drawings such as sections and floor plans during the design stages of the project, we can check the design is adequate and if there appears to be any junctions or details where ‘noise flanking’ may occur, we can then advise if any changes are required to lower the chance of sound test failures.
There are many factors to consider when considering good acoustic design, and they are usually split up into five key factors. If used together or in various combinations they will improve sound insulation properties over a wide range of frequencies. The main factors are:
Also, noise flanking transmission may in some cases be the dominant pathway between adjoining dwellings, especially in existing buildings where you are planning to convert offices/large houses into flats. Here are just a few of the potential noise flanking areas:
- Structural Steels
- Windows built very close to Internal partitions
- Inner leaf of the external wall
- External wall cavities
- External façade or outer leaf
- Roof structure
APT Sound Testing can advise on all types of acoustic design, whether it’s during the initial design of a new build project and/or undertaking sample sound testing and design during a refurbishment/renovation project. We also undertake UKAS accredited sound insulation testing providing a ‘one stop’ solution for all your acoustic requirements.
If you would like more information on our full range of our acoustic services please contact us now at email@example.com or call Darren direct on 07775 623464.