How Is Sound Insulation Testing Carried Out?

How Is Sound Insulation Testing Carried Out?

For airborne wall and floor sound tests, two individual speaker positions are used for each source room; with a total of ten individual 1/3 octave band measurements recorded for both the source and receiver rooms. Measurements are then made to monitor the levels in the receiving room of the tested partition in question. This gives a basic level difference between source and receiver rooms.

Sound_Insulation_Testing_Equipment

This basic level difference is then ‘corrected’ to allow for the reverberation time (the time taken, in seconds, for a noise source to decay by 60 dB) and the existing levels of background noise monitored whilst in the receiving room.

All our tests are carried out in full accordance with BS EN ISO 140-1998 parts 4 (airborne sound testing) and 7 (impact sound testing), and the calculation of all single figure results are done so in accordance with BS EN ISO 717:1.

How do I know when my site is ready for testing?

Sound testing is typically conducted when a development nears completion, and once all internal and external doors and windows have been fitted, it is worth noting that no carpets should be installed prior to the sound testing.

To be able to conduct sound insulation testing we a constant supply of 240V power; we cannot use generator power. We also require a quiet site (a noisy site can make conducting the tests extremely difficult), so no drilling, jack hammers etc. should be used whilst the testing is taking place. We also require full access to all rooms to either side of the dividing partition so if it is a requirement to access a neighbour’s property, this must be arranged prior to the test date.

If you require a sound insulation test than contact us know, we will explain what the test entails and send you our informative checklist to help you prepare for the test. It is our mission to ensure our clients pass their testing at the first attempt. We pride ourselves on providing a ‘one stop acoustic solution’ for all your acoustic requirements.

If you would like more information in regards to our acoustic services, including acoustic design reviews, sound testing and noise surveys please contact us at: info@aptsoundtesting.co.uk or call Darren on 07775623464 or visit our website at: www.aptsoundtesting.co.uk