Sound Insulation Testing in London

Sound Insulation Testing in London

London is a massive city containing over 9 million people density and high rise apartments. With many living in this overcrowded environment it is essential that noise transference between adjoining properties in kept to a minimum for the occupant’s well-being. One way of ascertaining that a building is in compliance with Building Regulations Part E for the prevention of noise transference, is to undertake Sound Insulation Testing in London.

Sound_Testing_Flats

We have undertaken thousands of sound insulation tests throughout London and the South East on all types of projects from simple flat conversions to large developments containing hundreds of flats. We also undertake Sound Insulation Testing where a lease holder dispute has arisen, i.e. where the buildings lease stipulates that wooden floors should not be used instead of carpets and as a result of the change of floor finish the noise levels have increased – especially the impact noise. We can also undertake sample sound testing to highlight the existing noise levels so a targeted acoustic design can be undertaken.

Plate A – Tapping Machine for Impact Sound Testing

Impact Sound Testing

Currently we are also experiencing a rise in the amount of sound testing required to existing blocks of flats, such as existing council stock. This is hardly surprising as the amounts of noise complaints have more than doubled within the last 10 years due to residents experiencing excess noise between the dividing wall and floor partitions.  By utilising our extensive knowledge of different materials and construction we can forward a simple, explanative cost effective solution for wall and/or floor upgrade. Where our clients have followed our advice they have achieved a 100% success sound test pass rate ensuring compliance with Part E of Building Regulations.

APT Sound Insulation Testing offer both preconstruction and post construction design solutions if a project has failed the sound testing. We also offer onsite inspection services to ensure that the sound insulation elements are being installed as per manufactures guild-lines.

If your require pre-completion sound testing and/or you would like acoustic design advice on your project, please contact us now at info@aptsoundtesting.co.uk.

Impact Sound Insulation Testing

Impact Sound Insulation Testing

Impact sound transmission testing is undertaken to floors only. This test is different, a calibrated Norsonic ‘tapping machine’ which comprises of five ‘hammers’ driven up and down by a cam and electric motor is used to “tap” the floor surface by applying a known force on the floor structure. The machine is placed in several pre-determined positions. The resulting noise is measured in the dwelling below, using a sound level meter.

Impact Sound Testing

Thereafter, background noise measurements are made using a class 1 sound level meter in the receiving room and are used to apply appropriate corrections for external sound such as traffic noise. Similarly the reverberation time (the time taken for sound to decay by 60dB) is measured within the receiving room using the sound source and a sound level meter to determine the corrections that must be applied to account for the characteristics and absorptiveness of the room.

The measured noise levels in the receiving room are corrected for background and reverberation characteristics determine the impact sound insulation performance of the floor. For the impact noise the lower the measured level, the better the performance as less sound is being transmitted into the dwelling below.

The time taken to undertake sound testing varies from project to project as no site is exactly the same. Taking into account the standard site conditions impact testing is usually undertaken as part fo a 6 pack test, consisting of  2 airborne wall, 2 airborne floor and 2 impact sound tests. A standard 6 pack test will usually take between two  and three hours, although this is dependent on our engineers having full free uninterrupted access between all the units/rooms under investigation.

If you require sound insulation testing, and/or acoustic design advice then please contact us now at info@aptsoundtesting.co.uk  or phone me (Darren) directly on 07775623464.

The Two Types of Sound Insulation Test

The Two Types of Sound Insulation Test

There are two types of sound insulation testing, Airborne and Impact.

Airborne sound testing is undertaken to walls & floors. Firstly a controlled noise is generated by an amplifier and loudspeaker across a broad range of frequencies. The generated noise is very loud and is often in excess of 100dB. Initial measurements are taken using a class 1 sound level meter within the ‘source room’ followed by further measurements in the ‘receiver room’ on the other side of the wall or floor under investigation. The source room speaker position is then changed and the measurements repeated either side of the partition under test.

Sound_Insulation_Testing_Equipment

Thereafter background noise measurements are made using a class 1 sound level meter in the receiving room and are used to apply appropriate corrections for external sound such as traffic noise. Similarly the reverberation time (the time taken for sound to decay by 60dB) is measured within the receiving room using the sound source and a sound level meter to determine the corrections that must be applied to account for the absorptive characteristics of the room.

The difference in the two airborne noise levels (for walls and floors), corrected for background and reverberation characteristics determines the airborne sound insulation performance of the wall, or floor. A greater airborne noise difference between the source room and the receiver room determines a higher airborne sound insulation performance.

The time taken to undertake sound testing varies from project to project as no site is exactly the same. Taking into account standard site conditions a set of tests on houses -two airborne walls will take one to two hours. A six pack of tests on flats – 2 airborne wall tests will usually take between one and two hours, although this is dependent on our engineers having full free uninterrupted access between all the units/rooms under investigation.

If you require sound insulation testing, or acoustic design advice then please contact us now at info@aptsoundtesting.co.uk  or phone me (Darren) directly on 07775623464.

Why do my Floors Squeak?

Why do my Floors Squeak?

We often receive complaints from clients in regards to their floors creaking. This is often because the Joists are often spaced too far apart, which can result in a reduction in floor stiffness. Over-notching of joists can also lead to a reduction in floor stiffness and also potential squeaking. Although the floors may pass the airborne and impact sound testing, however it won’t stop the squeaking of the floors under the extra load imposed by people walking above.

sound_transmission_through_floors

Other problems may be down to the contractor using 12mm floor boarding instead of 18mm to the top of the joists, again this may allow the boards to move and squeak. It may also be down to the chipboard not sitting level across the joists, this may down to the  joists being installed at slightly the wrong level or a joist hanger may have been hit or come loose during the build. If the joist has been built into the wall the bearing could be unsatisfactory. it may be as simple as a missing joist, or cut edge unsupported or an over span on the joists.

  • Incorrect bridging of resilient layer by over-long screws/nails
  • Fixings connecting ceiling boards to resilient bars should not bridge to joists
  • Extra wide joist spacing that reduces floor stiffness
  • Platform floor resilient layers damaged by inserting pipes and services within the layers
  • Reduction in stiffness due to use of joist hangers
  • Ceiling boards not staggered
  • Over-notching of joists for services reduces floor stiffness
  • Incorrect omission of flanking strips at floor edge perimeters.

In most cases, due to the complexity of acoustical and noise problems along with an overwhelming variety of material designs and combinations due to varying constructions, it is impossible to cover all problems in a short article such as this; however in our experience if the acoustic design is taken into consideration from the offset of the project, then it usually results in compliance with Building Regulations Part E.

If you have a project that requires acoustic design advice and/or sound insulation testing, then please contact us at: info@aptsoundtesting.co.uk or phone me (Darren) on 07775623464.

HOW MANY SOUND TESTS DO I NEED ON MY PROJECT

HOW MANY SOUND TESTS DO I NEED ON MY PROJECT

Our clients often ask ‘how many sound tests do I need on my project’? Part E stipulates that one set of sound tests needs to be undertaken for every ten flats or houses, provided the construction system is the same, if it’s not then you may be required to undertake a set of tests on each type of construction.

A set means 6  sound tests, this should include two locations where the party element (wall or floor) is tested. This is equivalent to two individual tests when assessing the performance of a wall this means 2 airborne wall, 2 airborne floor and 2 impact sound tests as a minimum wherever possible. Wherever possible tests must be undertaken between habitable spaces (e.g. bedrooms and living rooms. Here is a quick summary of the amount of tests required per type of project.

Semi-Detached Houses:

On a pair of semi-detached houses, two airborne sound insulation tests on a pair of separating walls would be required.

Sound_Testing_Semi_Detached_House

Flats (Up to 10 flats)

On flats a 6 Pack would normally be required, this would usually comprise of two airborne sound insulation tests on separating walls; two airborne sound insulation tests of separating floors and two impact sound transmission tests of separating floors.

Sound_Testing_Flats

Rooms for Residential Purposes (up to 10 Rooms)

On student accommodation, hotel rooms & care homes a set of tests would usually comprise of one airborne sound insulation test of a separating wall; one airborne sound insulation test on a separating floor and one impact sound transmission test of a separating floor

Sound_Testing_Hotels

If you are unsure of the amount of sound tests required on your development, please contact us now at: info@aptsoundtesting.co.uk or call me direct on 07775623464.

Here is a link to our website www.aptsoundtesting.co.uk  which shows you our full range of services in compliance with the latest Building Regulations.

Tips to Pass your Sound Insulation Test

Tips to Pass your Sound Insulation Test

Our clients often get asked for tips in regards to passing their sound testing; here are a few tips to help you pass Building regulations Part E:

  • Ensure all penetrations are fully sealed where they terminate through floors and they are adequately boxed with acoustic quilt and two layers of plasterboard.
  • Avoid the use of lightweight blocks in the inner envelope construction as sound will travel both vertically and horizontally from dwelling to dwelling.
  • The use of resilient suspended ceilings will help improve the performance of the floor partition.
  • Ensure all support steels/timbers are carefully boxed out where they travel from flat to flat vertically and horizontally.
  • Use a high quality resilient acoustic membrane on top of the floor to improve the impact performance of a floor.
  • Ensure that you don’t position sockets back to back in acoustic partitions walls.

architect drafting a house blueprint

There are many factors to consider when considering good acoustic design, and they are usually split up into five key factors. If used together or in various combinations they will improve sound insulation properties over a wide range of frequencies. The main factors are:

  1. Mass
  2. Isolation
  3. Absorption
  4. Resilience
  5. Stiffness

Another potential problem can also be down to noise flanking transmission, especially in existing buildings where you are planning to convert offices/large houses into flats. Here are just a few of the potential noise flanking areas:

  1. Structural Steels
  2. Windows built very close to Internal partitions
  3. Inner leaf of the external wall
  4. External wall cavities
  5. External façade or outer leaf
  6. Roof structure

If you click on this link: http://blogyourbusiness.co.uk/designing-for-sound-testing-in-london/ it will take you to the corresponding article which should help explain this in more detail. Here is a link to our website www.aptsoundtesting.co.uk which shows you our full range of services in compliance with the latest Building Regulations. 🙂

If you would like more information on our acoustic services, please don’t hesitate to contact me at: info@aptsoundtesting.co.uk or call me (Darren) direct on 07775623464.

Good Acoustic Design for Sound Testing

Good Acoustic Design for Sound Testing

To attain the standards stipulated within Building Regulations Part E, careful consideration should be shown to your buildings acoustic design  from the start of the project; however this requires different construction techniques and acoustic design detailing for new and build and conversion projects. With new build properties you have a blank canvas in terms of the overall design whereas conversions usually require you to work with the existing construction which can be quite difficult if the existing construction is not acoustically robust.

sound_transmission_through_floors

To try and overcome the problems with attaining Part E for your conversion project, we now offer an acoustic design package, which contains the following elements:

  1. Sample Sound Testing – of the existing construction. This offers an accurate overview of the acoustic performance of the existing partitions; this enables us to offer a targeted acoustic design using the sound insulation performance of the existing construction.
  2. Acoustic Design Review – a full design review of the proposed developments party walls and floors taking into account the performance characteristics of the existing construction as well as the buildability and materiel cost of the acoustic upgrade.
  3. Site Survey Visits – to let us view the existing site construction. This allows us to check for potential problematic construction such as inclusion of lightweight blocks in the existing construction. It also lets us check that the installation teams are installing the acoustic materials as per manufacturer’s guidelines.
  4. Final Precompletion Sound Testing  – in compliance with Building Regulations Part E to help achieve building control sign off.

We have undertaken hundreds of design reviews around London and the South East with our clients achieving  a 100% pass rate where the acoustic review has been followed. If you would like some more information in regards to our acoustic services and/or sound testing services please visit our website at info@aptsoundtesting.co.uk, or contact us at: info@aptsoundtesting.co.uk or call me (Darren) direct on 07775623464.

 

A Successful Sound Insulation Test

A Successful Sound Insulation Test

There are many considerations to achieving a successful sound test on your development. The main areas that need to be addressed are the dividing wall and floor construction.

When dealing with walls you normally just need to worry about airborne sound; however with walls it’s both airborne and impact sound which can be far more difficult to deal with.

sound_transmission_through_floors

The usual noise problems associated with airborne sound transmission is TV noise, music and speech. This can be dealt with by applying ceiling treatments as well as mass and isolation to the building components. Impact sound (footfall) performance is increased by the used of resilience layers and isolation of components to prevent noise flanking through the partition.

Airborne Sound Testing

For airborne sound insulation testing Building Regulation Part E requires you achieve at least 45dB for new build properties and 43dB for conversion developments, this applies both to party walls and floors between properties. This level is the difference between the source level and the receiver level during sound testing. Impact Sound TestingThe measurement is corrected for several factors such as background noise, room characteristics and frequency weighting, giving the final sound insulation performance value of the tested partition. In this case the higher the number the better the sound insulation performance. The measurement is done by using a Class 1 Analyser and the associated equipment.

Impact Sound Insulation Testing

For impact sound insulation testing Building Regulation Part E requires you achieve at least 62dB for new build properties and 64dB for conversion developments. Impact insulation performance only applies to party floors and related to the effectiveness of the floor construction in absorbing shock such as footfall noise.Sound_Insulation_Testing_Equipment

Good Acoustic Design

To try and ensure you meet the standards stipulated within Building Regulations Part E, careful consideration should be shown to the acoustic design detailing from the start of the project. Tackling the acoustic design for both new build and conversion project requires two different construction techniques and acoustic design detailing. With new build properties you have a blank canvas in terms of the overall design whereas with conversions you usually need to work with the existing’ onsite’ construction which can be quite difficult.

We offer an acoustic design package, which contains the following elements:

  1. Sample Sound Testing – of the existing construction. This offers an accurate overview of the acoustic performance of the existing partitions which enables us to offer a targeted acoustic design using the sound insulation performance of the existing construction.
  2. Acoustic Design Review – a full design review of the proposed developments party walls and floors.
  3. Site Survey Visits – to let us view the existing site construction. This allows us to check for potential problematic construction such as inclusion of lightweight blocks in the existing construction. It also lets us check that the installation teams are installing the acoustic materials as per manufacturer’s guidelines.
  4. Final Precompletion Sound Testing in compliance with Building Regulations Part E.

If you have a project that’s needs acoustic design advice or sound insulation testing, then please contact us at: info@aptsoundtesting.co.uk or phone us directly on 07775623464.

We have also started our new facebook page at: https://www.facebook.com/APT-Sound-Testing-1705040043131199/

Sound Testing to Comply with Lease Conditions

Sound Testing to Comply with Lease Conditions

Many people unknowingly fail to abide by the lease agreement as they may not know that there is usually a condition that states that they need to employ an acoustic company prior to making any changes to the floor of their apartment. The lease conditions often states that you need to undertake sound insulation testing prior to the commencement of works and upon completion of works.

In many cases their neighbour/s may complain that they can hear extra noise, this is often due to the fact that they may have changed the floor finish from carpet to wood. Unless extra acoustic design considerations are taken into account it usually results in an increase of extra airborne and impact noise being heard in unit below.

Sound_Testing_for_Lease_Agreements

Even if the floor assembly has been designed and constructed to provide adequate airborne isolation, impact noise can still be a major problem. If the finished floor surface had previously been carpet, the carpeting and underlay will normally provide a good degree of impact sound isolation. On the other hand, when the finished floor is floor is constructed in hardwood, stone or ceramic tile. Achieving good impact sound isolation requires much more attention.

If you think you may have a problem with sound in your dwelling and or you have encountered complaints from a neighbour due to modifications you have made to the floor partition then please contact us now. In all cases try be sure to describe the problem in as much detail as possible. Describe the nature of the sounds, when and where you or your neighbour can hear it. Is it impact noise or airborne noise or a combination of both? The more information you can provide us, the quicker we can try to determine the nature of the problem and subsequently find a solution.

In many cases, due to the complexity of acoustical and noise problems due to varying constructions, it is impossible to cover all problems in a short article such as this; however in our experience if we are employed from the beginning of a project, it usually results in compliance with Building Regulations Part E and /or compliance with your leasehold agreement, which may avert costly legal battles at the end of the project.

If you are about to make changes to your apartment, and you think you require acoustic design advice, then please contact us now at: info@aptsoundtesting.co.uk  or phone me directly on 07775623464.

 

Sound Testing for Compliance with Lease Conditions

Sound Testing for Compliance with Lease Conditions

If you own or manage an apartment it has a lease agreement that has conditions relating to the changing of the floor construction, then you may require Sound Testing for Compliance with Lease Conditions. We undertake many leaseholder sound tests throughout London and the South East and offer a ‘4 step acoustic package’  to satisfy your lease conditions comprising of the following:

  1. Sample Sound Testing of the existing construction. This offers an accurate overview of the acoustic performance of the existing floor partition/s prior to the commencement of construction works. It also enables us to offer a targeted acoustic design using the sound insulation performance of the existing construction.
  1. Acoustic design review – once we have the performance figures from the sample sound testing have been established, we can forward a design that should improve the performance of the existing floor partition – even if you are changing the floor from a carpet to engineered timber floor finish!
  1. Site Visit – This allows us to check that the installation team is installing the acoustic materials as per manufacturer’s guidelines.
  1. Final Precompletion Sound Testing in-line with Approved Document E. This provides an accurate overview of the acoustic performance of the upgraded partition/s, the results of which can be handed over to the relevant person for sign off.

In most cases complaints are usually raised from impact noise such as foot fall from hard bottomed shoes etc. this is accentuated when the unit above has changed their floor finish from carpet to wood.

Sound_Insulation_Testing_Equipment

If you think you may have a problem with sound in your dwelling and or you have encountered complaints from a neighbour due to modifications you have made to the floor partition then please contact us now we can provide our ‘3 step plan’ to satisfy your units lease conditions, then please contact us now at: info@aptsoundtesting.co.uk  or phone Darren directly on 07775623464.